This tutorial demonstrates how to remove the O-Ring from the lid, clean it, lubricate it and return it to service.
Remove the lid from the chamber.
Lay flat on a clean surface.
Use a flat screw drive or flat stick to remove the O-Ring. Be careful not to cut it.
…
Clean the O-ring with a rag. If it has not been cleaned in awhile use some soap or cleanser.
Apply a generous amount of Petroleum Jelly – “Vaseline”. Spread completely around the O-Ring. DO NOT USE GREASE, only Petroleum Jelly.
Stretch the O-Ring back over the O-Ring groove and secure in place.
Chamber lid is now ready for use.
If your lid is very dirty and needs cleaning – check our tutorial on cleaning the lid.
